Several major classifications of Filter Cartridges Filter Element

1. Hydraulic oil filter element
Hydraulic oil filter element is mainly used for filtering oil in hydraulic systems, to remove particles and rubber impurities in the hydraulic system, ensure the cleanliness of hydraulic oil, and thus ensure the normal operation of the hydraulic system.

2. stainless steel filter

Features of stainless steel filter element:

•  Good filtration performance
• Uniform surface filtration performance can be achieved for filtration particle sizes ranging from 2-200um
•  Good corrosion resistance, heat resistance, pressure resistance, and wear resistance;
•  Uniform and precise filtration accuracy of stainless steel filter pores;
•  stainless steel filter cartridges have a large flow rate per unit area;
•  stainless steel filter cartridges are suitable for low and high temperature environments; After cleaning, it can be reused without replacement.

Application: Petrochemical, oilfield pipeline filtration; Fuel filtration for refueling equipment and construction machinery equipment; Equipment filtration in the water treatment industry; Pharmaceutical and food processing fields; Rated flow rate 80-200l/min, working pressure 1.5-2.5pa, filtration area (m2) 0.01-0.20, filtration accuracy（ μ m) 2-200 μ M filter material, stainless steel woven mesh, stainless steel perforated mesh, is used for pre stage water removal in heavy oil combustion systems, and can also be used for chemical liquid filtration, with an accuracy of 100um. The filter element material is stainless steel round microporous mesh. Suitable for pre-treatment and post-treatment systems in industrial sectors such as electronics, petroleum, chemical, pharmaceutical, and food. Further purify water with low levels of suspended impurities (less than 2-5mg/L).

3. PP filter element

also known as PP melt blown filter element, is made of polypropylene ultra-fine fiber hot melt entanglement. The fibers randomly form a three-dimensional microporous structure in space, and the pore size is distributed in a gradient along the flow direction of the filtrate. It integrates surface, deep, and precision filtration, and can intercept impurities of different particle sizes. Filter cartridge accuracy range 0.5-100 μ m. Its flux is more than 1.5 times that of the same precision peak room filter element, and it can be configured with different types of end cap joints to meet the needs of various engineering installations

4. Ceramic filter element
Due to the use of pure natural physical materials, there will be no secondary pollution during the use of the water purifier. At the same time, it does not remove all kinds of minerals in the water like the ceramic filter of a water purifier. It will retain beneficial minerals in the water, effectively remove mud, bacteria, rust, never clog, have a long service life, and excellent filtration effect. At the same time, it is not afraid of clogging and can adapt to very poor water quality situations. At present, the ceramic filter element with the highest filtration accuracy internationally is the dual control membrane ceramic filter element, with an average pore size of 0.1 μ M. The water filtered by this filter does not need to be boiled and can be consumed, fully meeting the national standard for direct drinking water.

ect…